Author: Neoklis
Description: xnec2c: GTK+v2-based GUI version of nec2c
Keywords: xnec2c GTK2 graphical nec2c NEC2 C

## Xnec2c User Manual

#### Xnec2c is a GTK2-based Graphical version of nec2c, the C translation of NEC2

1. Introduction
2. Features
   - Interactive Operation
   - No Output File
   - Windows
   - Color Coding
   - On-demand Calculation
   - Multi-threaded operation on SMP machines
   - Built-in NEC2 input file editor
3. Limitations
4. Compilation and Installation
5. Operation
   - Command Line Options
   - The Main Window
   - The Radiation Pattern Window
   - Frequency Data Plots
   - NEC2 Input File Editor
6. Input File Considerations
7. Output File Considerations
8. Version History
9. Bugs and Inadequacies
10. Acknowledgement

1. Introduction:

Xnec2c is a GTK2-based Graphical version of nec2c, my translation to the C language of NEC2, the FORTRAN Numerical Electromagnetics Code commonly used for antenna simulation and analysis. The original nec2c is a non-interactive command-line application that reads standard NEC2 input files and produces an output file with data requested by "commands" in the input file. In contrast xnec2c is a GUI interactive application that (in its current form) reads NEC2 input files but presents output data in graphical form, e.g. as wire frame drawings of the radiation pattern or near E/H field, graphs of maximum gain, input impedance, vswr etc against frequency and simple rendering of the antenna structure, including color code representation of currents or charge densities. These results are only calculated and drawn on user demand via menu items or buttons, e.g. xnec2c is interactive and does not execute NEC2 "commands" in batch style as the original does. Printing of results to an output file has been removed starting from version 1.0, since xnec2c works in a way that does not allow printing compatible with the NEC2 format. If printing to file is needed then it is better to use the original NEC2 program, to avoid bugs that may still be lurking in the C translation.

Xnec2c now has a built-in editor for NEC2 input files which can be used to edit geometry or command "card" data. This basic editor displays comment, geometry and command cards in tree views where individual rows, each representing a card, can have their cells edited directly for "raw" entry of data. More useful are pop-up "editor" windows that open when appropriate buttons are clicked or when a selected row is right-clicked with the mouse. These editors allow easier, more convenient entry and editing of individual rows, with no need for detailed knowledge of "card" formats. When editing is completed, the contents of the nec2 editor can be saved in a NEC2-compatible input file which can then be re-loaded by xnec2c for execution.

2. Features:

- Interactive Operation:
  Xnec2c is interactive in its operation, e.g. when started it just shows its Main window in a "blank" state, indicating that no valid input data has been read in yet. The NEC2-type input file can be specified at start-up in the command line with the -i option or it can be opened from the file selection dialog that appears via the File->Open menu of the Main window. Once a valid input file is opened, all the normal widgets in the Main window appear so as to allow proper operation. The NEC2 "commands" in the input file are read in but not executed, until a request is issued by the user via buttons or menus in the appropriate windows.

- No Output File:
  Printing of results to an output file has been removed starting from version 1.0, since xnec2c works in a way that does not allow printing compatible with the NEC2 format. If printing to file is needed then it is better to use the original NEC2 program, to avoid bugs that may still be lurking in the C translation.

- Windows:
  In its current form, xnec2c has three windows for the graphical display of output data: When started without an input file specified by the -i <input-file> option, the Main window opens with most of the button and menu widgets hidden. When a valid input file is opened, all the hidden widgets are shown and the structure is drawn in the Main window's drawing area widget. From the View menu, the Radiation Pattern and Frequency Related data display windows can be opened, to draw either the Gain pattern or the Near E/H fields or Frequency-related Data like Input Impedance, VSWR, Max gain, F/B Ratio, Gain in the Viewer's direction etc. Both the Main window and the Radiation Pattern window have buttons to select fixed viewing angles of the structure or the radiation pattern, as well as spin buttons to input specific viewing angles.

- Color Coding:
  Xnec2c uses color coding to visualize the Current or Charge distribution in the Structure's segments or patches as well as the Gain pattern or the Near E/H field pattern. Color coding is also used to clarify the Graphs of Frequency-related data. A color code strip is shown in the Main and Radiation Pattern windows.

- On-demand Calculation:
  Since xnec2c collects data to be displayed in buffers directly from the functions that produce them, there is no need to produce and parse an output file and no need to re-run the program when certain input data (currently the frequency) is changed or when different output data (gain, near-fields, input impedance etc) is required. The frequency can be changed either from spin buttons in the Main and Radiation Pattern windows or by clicking on the Frequency Data window's graph drawing area. The frequency corresponding to the pointer position will then be used to re-calculate whatever data is on display.

- Multi-threading operation on SMP machines:
  Since version 1.0, xnec2c can run multi-threaded (by forking) on SMP machines, when executing a frequency loop. Multi-threading is enabled by using the -j<n> option, where n is the number of processors in a SMP machine. xnec2c will spawn n child processes, to which it will delegate calculation of frequency-dependent data for each frequency step. Thus data related to n frequency steps will be calculated concurrently and passed on the the parent process by pipes, to be further processed for graphical display. Child processes are spawned before GTK is initialized and started so that only the parent process is tied to the GUI interface. Thus there are n+1 processes running when the -j option is used and execution is faster by slightly less than n times. Please note that its pointless and counter-productive to specify a value of n greater than the number of steps in the frequency loop.

  Built-in NEC2 input file editor:
  Xnec2c has a built-in editor for NEC2 input files. Data in NEC2 "cards" can be entered or edited either directly in the main editor window (tree view) or in more convenient dedicated editors for each type of card. Edited data can be saved to a NEC2 input file and reloaded for execution so that the edit-execute-display cycle is quicker and more convenient.

3. Limitations:

Since xnec2c is interactive, it cannot operate in the same way as NEC2 or nec2c. Specifically, commands that cause execution in NEC2/nec2c (XQ, RP etc), are only read in but not acted upon unless the user requests the display of relevant data. For example, if an RP command line is included in the input file, xnec2c reads the relevant data from that line but does not calculate/render the radiation pattern, until the user requests this by opening the Radiation Pattern window and clicking on the Gain button. In addition, the NX and WG/GF commands are not recognized since only one structure at a time can be input and evaluated, and the Numerical Green's function is not needed or implemented. Also, some options of certain commands (e.g. the surface wave option I1=1 of the RP command) are not implemented and they must not be used since they will disrupt or even crash xnec2c.

There are advantages deriving from the interactive operation: it is possible, for example, to specify both the NE and NH commands in combination with a multiple-frequency FR card, although only the relevant data of the last command will be used.

4. Compilation and Installation:
Please note that I use Arch Linux AMD64 which is a "bleeding edge" type distribution, so there may be compilation and/or run time difficulties if you are using a relatively old distro. This is mostly true of the basic dependencies like GTK+ 2 and Glade-2, and there can also be sound card incompatibility problems at run time.

To compile the package the first time, run the "autogen.sh" script in the package's top directory. The "configure" script as produced by Glade-2 specifies the gcc flags as "-g -O2", but if you want to specify different flags, you will have to run "configure" with the CFLAGS option, e.g. ./configure CFLAGS="-Wall -O2 -march=i686" or whatever flags of your choice.

Run "make" to produce the executable binary "xnec2c" in src/. This can then be copied to a suitable location, usually /usr/local/bin or /usr/bin. You can of course run "make install" which will install the binary into /usr/local/bin by default. You can change this to a different location, e.g. /usr/bin, by including the --prefix=/usr option when running "configure". To recompile the package, you must run "make distclean" in the top directory to clean up the package and then run the "configure" script and "make install".

No configuration files are needed and the sample input files that were used during development are in the xnec2c/examples directory. Please also read the xnec2c/doc/nec2c.txt file that describes the nec2c application that is used as the basis for xnec2c.

5. Operation:

Command Line Options:
Xnec2c has the following command line options:

-i <input-file-name>: Specify a NEC2 input file to be opened at start-up.

-j <number of child processes to spawn>: Since version 1.0 xnec2c can run multi-threaded on SMP machines. This option specifies the number of child processes to spawn by forking, so that the total number of processes running will be n+1. n should be equal to the number of processors in a SMP machine. Please note that its pointless and counter-productive to specify a value of n greater than the number of steps in the frequency loop.

-h: Print usage information and exit.

-v: Print version information and exit.

The Main Window:
When starting xnec2c from a terminal or from a file manager (by OLE), the -i option can be used to specify a NEC2 input file: xnec2c -i ~/nec2/turnstile.nec. Otherwise an input file can be opened from the Main window's File->Open menu item. If the input file is valid, xnec2c will render the structure specified in the Geometry section of the file in the Main window's drawing area. The background color is black and the structure is rendered in blue. The excitation points (segments) are rendered in red, the x, y, z axis in white, loaded segments in yellow, transmission lines in cyan and two-port networks in magenta. These colors are hard-coded in the source code and at this stage of development there is no option to change them.

Once an input file is opened, the structure display can be rotated around the Z axis and tilted about a horizontal axis through the origin. This can be done either by pressing button 1 and dragging the structure with the mouse pointer, clicking the X, Y, Z or the right-arrow Default view button (45 deg rotation and tilt). The actual value of rotation and tilt is shown in two spin button widgets which can also be used to change the viewing angle.

The current distribution or charge density in the structure can be displayed by clicking the Cur or Chg toggle buttons at the top right of the Main window. The distribution of current or charges is rendered by a color code, red for the maximum value and magenta for zero. The Frequency Loop control buttons can be used to Start, Pause or Reset the loop. There is a Color Code bar at the left of the second row of widgets in the Main window, indicating the color coding and the maximum value of the displayed quantity (at its right).

The title in the border of the drawing area widget shows the user-selected function of the display, while the text entry widget at the right of the color code bar shows antenna gain in the Viewer direction, e.g. perpendicular to the Screen. To the right of this the Frequency Spin Button shows the current frequency in MHz for which the current/charge distribution and Viewer gain are calculated and displayed. If the Redo Check box is active, each time the frequency is changed in the spin button, all relevant data on display will be recalculated. If not, clicking the Redo button will initiate recalculation.

Printing of results to an output file has been removed starting from version 1.0, since xnec2c works in a way that does not allow printing compatible with the NEC2 format. If printing to file is needed then it is better to use the original NEC2 program, to avoid bugs that may still be lurking in the C translation. Otherwise, it is possible to save the structure drawing to a PNG file by using the Save or Save As items in the File menu.

The View menu allows opening of other output data display windows and selection of various options:
The Radiation Pattern menu item opens the Radiation Pattern window so that the Gain pattern or the Near E/H fields can be calculated and displayed.
The Frequency Data item opens the Frequency Data Plots window which allows the plotting of various frequency-related data against the frequency range specified in the FR command. It also allows quick selection of the current frequency and recalculation of data by clicking on the plots drawing area.
The Polarization sub menu allows the selection of different polarizations for which many data items are calculated (e.g. gain, F/B ratio etc). The selection is global, e.g. it effects all relevant data that are drawn or displayed in other windows.
The Common Projection item couples the projection (viewing angle) parameters of the Structure display in the Main window and the Gain or E/H field display in the Radiation pattern window so that both move in step. Similarly, the Common Frequency menu item couples the Frequency entry/display spin buttons in the same windows so that displayed data are for the same frequency.

The Radiation Pattern window:
On the top row of widgets, this window has the same Viewer angle selection buttons and spin button displays as the Main window. The two buttons at the middle right (Gain and E/H) select either the Gain or the Near Electric/Magnetic Field pattern display. Provided there are at least two steps in the theta and one in the phi angle as specified in the Radiation Pattern (RP) command, the Gain pattern will be calculated and drawn. The E/H field will be properly drawn if there are at least two points specified in the NE or NH commands. The Frequency Loop control buttons at the far right can be used to Start, Pause and Reset the loop.

The View menu, in addition to the Common Projection and Common Frequency check buttons, provides sub-menus for selecting Polarization type, Gain Scaling and the Near Field data to be drawn. The selection of polarization type affects the Gain pattern, the displayed Viewer gain and the value of max and min gain as shown to the left and right of the color code bar. The selection of gain scaling only affects the form of the Gain pattern drawing: Linear Power is the most realistic, since the distance from the origin of each point in the gain pattern is proportional to the radiated power density, as is the color code (red for max gain and magenta for min gain). A disadvantage of this scaling is the inadequate representation of side lobes since they are usually significantly weaker than the main beam. Linear Voltage is better in this respect since the position of points in the gain pattern is proportional to Electric field strength and hence follows a square root law. ARRL Style follows a form of logarithmic scaling suggested by the American Radio Relay League, e.g. exp(0.058267 * gain) where gain is in dB10. Finally Logarithmic follows a logarithmic scale with a median of 40dB.

When a Near Field (NE or NH) command is included in the input file, clicking the E/H button produces a drawing of the near Electric and/or Magnetic fields. By selecting the Near Field->Poynting Vector menu item the Poynting vector is also drawn. These fields are depicted by lines of fixed length in the direction of the relevant (E/H/Poynting) vector at each point in the drawing. The field strength is depicted by the color of the lines as using the line length for this purpose makes most lines too small to be useful. The drawing of the Near E or H Fields can be enabled or disabled by the Near Field->Near E Field and Near Field->Near H Field menu items.

The Near Field->Animate Dialog menu item opens a dialog box for setting the parameters and starting an Animation of the near field pattern. The Steps/Cycle spin button allows the setting of the number of angular steps around a cycle of the excitation input. The default is 36 and it results in angular steps of 10 degrees. The Animate Frequency spin button specifies a fictitious (slowed down) excitation frequency for which the animation is performed. The default is 1.0 Hz. Clicking the Apply button starts an animation of the near fields using the specified parameters. The OK button does like wise but it closes the animation dialog, while Cancel stops the animation.

The Total Field sub-menu allows the selection of drawing either the Peak value or a "time-frozen" Snapshot of the instantaneous value of the total Near Field E/H vectors. The Snapshot values are calculated as the vector sum of the X, Y, Z components of the E/H field and the Peak values are calculated using the formula NEC4 uses to print the Peak field values.

The Overlay Structure menu item enables the drawing of the structure in the radiation pattern drawing area when the Near Field pattern is selected for drawing. This makes it easier to understand the scale and extend of the Near Field patterns around the structure. The color scheme for the structure becomes white when Overlay is enabled, unless it is overridden by either the Current or Charge distribution being enabled by the relevant buttons in the Main window.

In the second row of widgets, the Color Code bar shows either the max and min values of Gain in the radiation pattern or the maximum value of the field strength in the near E/H field pattern. (Of course only one value can be shown, the precedence being E field, H field or Poynting field strength, depending on which of these is enabled in the View->Near Field sub menu). The Text Entry widget at the right of the color bar shows gain in the direction of the viewer (perpendicular to screen), while the Frequency Spin button following it shows the current frequency in MHz for which data is displayed. It can also be used to enter a new frequency in the same manner as in the Main window. The Redo Check box enables re-calculation and display of data when the frequency value changes, while the button to its right causes same when clicked by the user, but only if a new frequency has been entered.

Currently the Gain pattern is drawn as a transparent wire frame, with each line segment colored according to the average value of gain associated with the two points it joins. The pattern can be "dragged" with the mouse pointer to rotate or tilt it and it can also be positioned using either the X, Y, Z or Default (right arrow) buttons. The Rotate and Incline spin buttons can also be used to accurately position the Gain pattern in the window. The label in the drawing area's frame gives information on what is on display and also the type of polarization or gain scaling.

Both the Gain and Near Field patterns can be saved as PNG image files by using the File->Save or File->Save As menu items. The Save option will save the drawings with a suitable default file name which includes a serial number, so that consecutive Saves do not overwrite files, but please note that when xnec2c is restarted the serial numbers are reset so that overwriting will occur if the same input file is opened.

Frequency Data Plots window:
The Frequency Data Plots window is the main display of frequency related data such as maximum gain, VSWR, input impedance etc. Most data can be plotted against frequency and some are displayed in text entry widgets. It is also a convenient way to quickly enter a new current frequency by clicking on the graph drawing area.

The following applies to all graphs plotted in this window: When a graph of two quantities against frequency is plotted (e.g real and imaginary parts of input impedance), then one quantity is plotted in magenta color and its scale is at the left vertical side of the bounding box. The second quantity is plotted in cyan color and its scale is at the right side while a short descriptive title is printed in yellow at the top horizontal side. The graph bounding box is in white and the scale grid lines are in light grey. When only a single quantity is plotted against frequency, it is plotted in magenta color and the scale is at the left side of the bounding box.

Once graph plotting is complete (e.g. the frequency loop is done), clicking on the graph drawing area with button 1 (left mouse button) will produce a vertical green line in the graph bounding box, marking the new current frequency and triggering a re-calculation of all frequency-related data. Also, displays and drawings in all open windows (assuming the Redo check boxes are ticked active) will be refreshed to present the new data. Clicking on the drawing area with button 3 (right button) sets the frequency to the nearest frequency loop step value, as marked by the little boxes or diamonds on the graphs. However, all the displayed frequency-related data are still recalculated and refreshed e.g. buffered values are not used. Clicking with button 2 (middle button) cancels the green frequency-marking line.

The top row of widgets in this window has at its right buttons to select data to be plotted against frequency. These are:
Max Gain: Maximum gain and front-to-back ratio at each frequency step.
Dir: The direction of maximum gain, e.g. the radiation angle relative to the xy plane (90-theta) and the phi angle as defined in NEC2.
Viewer: The gain in the viewer's direction, e.g. perpendicular to the screen.
VSWR @ Zo: The VSWR for the Zo value in the Impedance Spin button (default 50 Ohm).
Zr/Zi: The real and imaginary parts of the input impedance.
Zm/Zph: The scalar magnitude and phase of the input impedance.
The View->Net Gain menu item changes the second plotted quantity to the Net Gain of the array. This was added after a feature request for xnec2c.

The Frequency Loop control buttons at the top right can be use to Start, Pause or Reset the loop. As the loop progresses, more data will be presented in the graphs and in the text entry widgets above the graph drawing area. These widgets display the current frequency in MHz, the maximum gain in the radiation pattern for that frequency, the VSWR for the Zo value in the spin button above and the real and imaginary parts of the input impedance.

The File->Save and File->Save As menu items can be used to save the graphs in the drawing area as PNG image files, with a default file name or one of the user's choice respectively. The View->Polarization sub-menu can be used to select the wave polarization type for which data is calculated and presented. When Viewer gain plotting is enabled, the graph will be re-drawn when the structure projection is changed by the various means described earlier (dragging by mouse pointer, Rotate/Incline spin buttons etc).

NEC2 Input File Editor:
Xnec2c has a built-in NEC2 input file editor to make the edit/save/execute cycle easier and quicker. The main editor window opens from either the File->New or File->Edit menu items of the Main window. The File->New menu item opens the editor with some default rows ("cards") that amount to a free space vertical dipole which serves as a simple example. The File->Edit menu is used to edit a NEC2 input file that is already open in xnec2c.

The main NEC2 input file editor can be used to directly edit rows if desired and indeed this is the only method available for editing Comments. The editor though has several dedicated sub-editors for each of the type of card that is indicated in the Buttons above the Geometry and Commands Tree Views. The dedicated editor windows open when these buttons are clicked (to add a new row) or when a selected row is right-clicked by the user with the mouse.

Main Editor Description:
The Main NEC2 Editor window is divided into three Tree View areas, one for editing Comments, one for editing Geometry and one for Control Commands. Each tree view has editable rows divided into cells that correspond to NEC2 input file's card columns e.g. Card Name (CM) - Comment Text or Card Name (GW) - Wire Data (I1 I2 F1 F2 F3 F4 F5 F6 F7) etc. Each row can be edited by selecting it with a mouse click and then clicking on a cell. This requires detailed knowledge of the format of each of the NEC2 input file "cards" and so this method is only useful for editing comments.

The main editor is controlled by the top row of buttons: The Add button inserts a new blank row in whatever tree view has been selected by a mouse click. The Remove button deletes a row that was selected by a mouse click and the Clear button deletes all rows in a selected tree view and clears it. The Save As button opens a file selector dialog for saving the data in the Editor to a NEC2 input file. The Save button writes data in the Editor to an already open input file. The Apply check button, when checked, signals xnec2c to reload the edited input file for execution. Due to the complex file opening process followed by NEC2 (many data sanity checks and initializations etc) reloading the input file results in all open windows (radiation pattern, frequency plots) to be closed and in xnec2c to reset also. Finally the Revert button reloads the last saved state of the editor from the input file, to reduce the effort needed to recover from a big mistake like clearing a tree view accidentally!

Sample Dedicated Geometry Editor Description:
Wire Geometry Editor: This is one of the dedicated "card" or row editors, for creating or editing wire geometry. It will appear when the "Wire" button in the "Edit Geometry Data" frame is clicked or when a selected Wire row is right-clicked with the mouse. In the former case, a blank "GW" row will be added to the Geometry tree view which can then be filled by entering wire geometry data in the Editor and clicking Apply or OK. (in the latter case the editor is closed). The "Tapered Wire" check button in the upper left corner opens an additional frame for entering wire taper data and adds a blank "GC" row to the tree view.

To make things easier, the Wire editor has spin buttons to specify Length Taper and Diameter Taper separately to hide the need for calculating the actual beginning and end diameters. Also the "Segs % lambda" spin button indicates the wire segment length as a percentage of smallest wavelength and can be use to set the needed number of segments for each wire to maintain a uniform relative segment length for all wires. Please note that this function will only work if the Frequency (FR) card is specified in the Commands tree view and all the data is saved to file and read by xnec2c, so that frequency data is valid in xnec2c's buffers. Please also note that all dedicated editors require wire diameter to be specified but then convert this to radius when entering to the Main editor and saving to file (NEC2 requires wire radius to be specified).

Three geometry Editors (wire, helix, arc) have a spin button to specify wire conductivity in Siemens/meter. When the spin button value is greater than zero, the Editor will enter an LD card in the Commands tree view to specify a type 5 (wire conductivity) loading. This will result in all segments with tag number equal to that in the Editor to be loaded with the specified resistivity. Please note that Deleting the row in the Geometry tree view will not remove the loading row.

All editors (except for the "GE" card) have the following buttons along the bottom of the window: "New" inserts a new blank row in the tree view after entering edited data into the current row. "Delete Card" removes the current row (card) and closes the editor window. "Apply" enters edited data into the current row. "OK" enters edited data into the current row and closes the editor window. Please note that the "GE" row is entered automatically by the first editor used, if the tree view is cleared, and there is no button for it in the Geometry frame. But there is a dedicated editor for it which opens with a right-click on the (selected) GE row and it should be used to specify the presence of Ground (GN command etc).

Sample Dedicated Control Editor:
Excitation Command Editor: The Excitation Command Editor opens when the "Excitation" button in the "Edit Control Commands" frame is clicked or when a selected "EX" row is right-clicked with the mouse. The excitation type is selected by activating the appropriate radio button whereby some labels over the data input spin buttons will change to indicate their purpose. The print control check buttons specify additional data to be printed to the output file but please remember that xnec2c does not produce an output file. The buttons in the bottom row of the Command Editors function in the same way as the Wire editor described above.

6. Input File Considerations:
Since xnec2c is interactive, it will not initiate calculations without a prompt from the user. For this reason certain NEC2 commands that normally cause execution (e.g. RP, XQ etc) are read in but not acted upon. Any data in the lines of these commands are saved for use when the user requests output data calculation and display, via buttons and menu items in the GUI. Also, since xnec2c was designed to visualize output data graphically, certain types of output data requests are not supported (e.g. the surface wave pattern option (I1=1) of the RP command etc). An error message dialog will hopefully appear to inform the user of unsupported commands or options. Here is a list of commands or command options not supported by xnec2c:

GF: Read Numerical Green's Function: Relevant code has been removed in nec2c since this type of solution is obsolete.
WG: Write Numerical Green's Function: Relevant code has been removed in nec2c since this type of solution is obsolete.
NX: Next Structure Data: Relevant code has been removed since xnec2c cannot operate in batch mode.
PQ, PT, CP: These commands affect printed output and have no effect on data presented by xnec2c in graphical form. Since version 1.0 xnec2c does not print results to file.
SOMNEC: The separate SOMNEC code has been incorporated in nec2c and hence in xnec2c also.
EX: When Incident Wave or Elementary Current Source Excitation is specified, xnec2c can only calculate and render the re-radiated field, produced by the current induced onto the structure. Only the initial values of the theta and phi angles are used and no stepping of these angles is performed. Therefore it is better to specify only one step for theta and phi in the EX card.
RP: The surface wave option (I1=1) is not supported.

7. Output File Considerations:
Printing of results to an output file has been removed starting from version 1.0, since xnec2c works in a way that does not allow printing compatible with the NEC2 format. If printing to file is needed then it is better to use the original NEC2 program, to avoid bugs that may still be lurking in the C translation.

8. Version History:

Version 0.1: First version with ability to draw a color-coded wire frame Radiation Pattern (Near and Far Field), Graphs of various Frequency dependent data (Gain, VSWR, Impedance etc) and the Structure (Wires/Patches), including a color coded Current or Charge distribution.

Version 0.2: Incorporated some changes to the GUI (the Glade-generated design) since after upgrading to GTK+ 2.8.9, the geometry of the windows (the position and extend of buttons/entry widgets) changed a little. Also fixed some bugs in the GUI code to handle unusual sequences of user actions correctly.

Version 0.3: Added the ability to stop the frequency loop by clicking on the frequency display spin buttons and to restart it by toggling the "Gain" or "E/H" buttons in the Radiation Pattern window.

Version 0.4b: Added a NEC2 input file editor that makes the edit/save/reload/execute cycle easier and quicker.

Version 0.5b:Fixed a bug that caused segmentation faults when only one wire segment was present in the structure. This is not a case that will normally exist but the seg fault had to be fixed.

Version 0.6b: Fixed a bug inherited from NEC2: If no geometry cards are present (only a GE card) then there is division by zero in conect(). NEC2 seems to accept the lack of geometry cards, this is now an error condition in xnec2c. Reduced the max value specification of the Capacitance spin button in the Loading card editor, from 1.0e+12 to 1.0e+9 (pF) since the higher value is beyond the range of the "long" type in 32 bit systems. Modified the behavior of some card Editors to make them more user friendly.

Version 0.7b: Fixed a bug in the co-ordinate translation (Move) editor and edited the code in the GW card editor so that the wire diameter does not change when the New button is clicked.

Version 0.8b: Fixed a serious bug that caused segmentation faults and crashes in structures that have a wire in contact with a patch. The subph() routine divides this patch into 3 or 4 sub-patches so the total number of patches increases. There was no provision to reallocate and initialize buffers used in rendering patches in the structure display window. Other minor bugs were also fixed and the example NEC2 files were also checked and edited when needed.

Version 0.9b: Fixed a few bugs mainly in the NEC2 editor code and also changed the code of all individual Geometry and Command editors, so that edited data are set in the main NEC2 editor's tree views when another Geometry or Command card (tree view row) is selected for editing.

Implemented a work round around a serious bug which I could not trace, since it now seems to be outside my code: When the zint() or fbar() functions are called, they seem to corrupt xnec2c's memory allocation when they return. This corruption manifests itself as NAN values appearing in calculations so I modified these functions to return their computed value via a pointer in the argument list. I also changed the function declaration from complex long double to void as it seems this bug is related to functions of the former type declaration, returning a value.

Version 1.0b: In this version xnec2c has been re-worked extensively to make it multi-threading and to streamline its operation to some extend. Many bugs created by these changes, and others that already existed have been fixed, and the user interface has also changed somewhat. The example input files have also been checked and some mistakes in them have been corrected. This is now the first version 1.0 beta release for public testing.

Version 1.0b3: Added setlocale(LC_NUMERIC, "C"); to the main() function, so that in locales where commas are used in decimal numbers xnec2c can read data correctly (suggested by Joop Stakenborg). Some minor changes to the user interface were also made to allow the NEC2 editor window to fit in displays with shorter heights.

Version 1.0b4: After a bug report from Juha Vierinen I changed some "sprintf" commands to "snprintf" to avoid buffer overruns.

Version 1.0b5: Following on the above changes, I revised all similar situations in xnec2c's source and modified all "sprintf" commands to "snprintf" just in case, as I could not replicate the bug so could not test for other similar problems. I also fixed a bug in the "save" and "save as" handler, to avoid false attempts by xnec2c to save structure and radiation pattern/frequency plots pixmaps when a save of the NEC2 editor data failed for some reason.

Version 1.0: After several months with no bug reports or feature requests, I am sticking my neck out and releasing xnec2c as version 1.0. This version incorporates the last two feature request I received from users:
The "Cancel" button on card editors has been replaces with a "Delete Card" button, which deletes the selected "card" (row in the NEC2 editor window).
A "Net Gain" menu item has been added to the View menu of the Frequency Plots window to replace the second plotted quantity with the Net Gain of the antenna.

Version 1.1: I spoke too soon! A segfault bug has been reported that occurs when Maximum Admittance Matrix Asymmetry printing is requested in the EX card. Although this is not supported in xnec2c, it still produces a segmentation fault because the "ipnt" buffer is not allocated in the netwk() function in network.c

Version 1.2: Made the page size of spin buttons 0 to make setting of spin button values compatible with GTK 2.4

Version 1.3: After an enquiry about using incident field excitation, which was not implemented in previous versions, I removed the restrictions in excitation to allow plotting the re-radiated pattern from a structure excited by incident field or elementary current source. However, the calculations are carried out only for one set of angle-of-incidence angles, e.g. there is no stepping of the theta and phi angles. This would require much more complex changes to xnec2c and I am not currently able to do this.

Version 1.4: Applied a patch supplied by Tom Beierlein, DL1JBE, to fix crashing of xnec2c 1.3 on long input file names (> 80 characters).

9. Bugs and Inadequacies:
Xnec2c is based on nec2c, my translation to C of the original FORTRAN NEC2 code. Any bugs discovered in nec2c will affect xnec2c as well and they will have to be fixed. In addition, changing the flow logic of nec2c, from a non-interactive batch-processing command line tool to a GUI-based interactive application, was rather complex and introduced many bugs that were fixed, but it is always possible that a combination of some input file with an untested sequence of user actions may trigger a hidden bug. Such a case in fact did appear and it was traced to a bug in the original NEC2 code. This has been fixed by G. Burke and the fix has been incorporated in nec2c and xnec2c. See the NEC2-bug.txt file for details.

When xnec2c was made multi-threading, a lot of bugs appeared and were fixed but again there may be some that have not showed up. One condition that did appear a couple of times was xnec2c getting blocked in a select() call, waiting for a child to write to a pipe. This apparently happened because I was testing a very minimal input file and the child processes seemed to write to the pipes before the parent process dropped into select(). If this seems to happen, do not enable multi-threading (don't use the -j option) for very simple jobs.

A known inadequacy of xnec2c is the slowness of the animation of displayed drawings, e.g. the structure itself, the radiation pattern, near fields pattern etc. Specifically, dragging these drawings with the mouse to rotate or incline them seems very heavy on processor loading, and with most structures the movement is jerky. This is my first attempt at animated wire frame drawings and I lack experience with GTK2 in this field, so I probably went about this the wrong way. I am open to any suggestions that may solve this problem! -;)

10. Acknowledgement:
Some of the code in xnec2c is based on Pieter-Tjerk de Boer's "xnecview" application, which visualizes NEC2's input and output files. The general 'look and feel" of xnec2c was also influenced by the same application.

Author: Neoklis Kyriazis (Ham Radio call: 5B4AZ)
September 20 2005